PVDF/PEG/TiO2 Hollow Fiber Membrane for Lead(II) Removal
August 2015  //  DOI: 10.12962/j23546026.y2015i1.1038
Shabrina Adani Putri, Fithri Yatul Humairo, Nurul Widiastuti, Chi Siang Ong, Juhana Jaafar + 1 more author

Metrics

  • Eye Icon 24 views
  • Download Icon 77 downloads
Metrics Icon 24 views  //  77 downloads
PVDF/PEG/TiO2 Hollow Fiber Membrane for Lead(II) Removal Image
Abstract

Polyvinylidenefluoride-Polyethyleneglycol Titanium dioxide (PVDF/PEG/TiO2) mixed- matrix hollow fiber membranes were prepared via phase inversion induced by dry-jet spinning method. The composition of the dope solution were PVDF 18 gram, PEG 2 gram, N,N-dimethylacetamide (DMAc) 80 mL and TiO2 varied from 0 to 4 gram. The PVDF/PEG/TiO2 mixed-matrix hollow fiber membranes were characterised using XRD, SEM-EDX and TGA. Results indicate that TiO2 addition affects the performance of membrane such as hydrofilicity, pure water flux, porosity and antifouling properties. 2 gram TiO2 addition was found to be the optimum amount based on the results of hydrofilicity, pure water flux, porosity and antifouling properties. Furthermore, PVDF/PEG/TiO2 membranes with xx g TiO2 were used to study the adsorption of Pb(II) on the membrane at various concentration from 20-100 ppm. Results show that the membrane demonstrates good performance with best capacity adsorption of 1.512 mg/cm2 at Pb(II) concentration of 100 mg/L.

Full text
Show more arrow
 

Metrics

  • Eye Icon 24 views
  • Download Icon 77 downloads
Metrics Icon 24 views  //  77 downloads